Your present position：Home > Information > LED Display Solution
LED Display Solution
How to identify good or bad quality of led display screen
1, the reducibility of color reducibility is refers to the display of color reducibility, the color of the display shows both to maintain highly consistent with the color of the source, so as to ensure the image sense of reality.
2 LED display, the smoothness of the surface roughness to within + / - 1 mm, to ensure that the image is not distorted, local convex or concave leads to display the visual Angle of corner. The stand or fall of flatness is mainly decided by the production process.
3, brightness and the viewing Angle of indoor led display brightness to above 800 CD/m2, outdoor full color brightness to above 1500 CD/m2, to guarantee the normal work of the screen, otherwise it will because the brightness is too low and can't see shown in the image .Mainly by the size of the brightness of LED tube core is good or bad decision.
4, with or without the shades of color piece is refers to the adjacent modules between relatively clear off color, color transition in module, color piece phenomenon caused mainly by the control system is poorer, grey level is not high, caused by lower scanning frequency.
Viewing angles directly depends on the size of the display screen of the audience, and the bigger the better. The size of the viewing Angle is mainly composed of tube core encapsulated way to decide.
5, the white balance effect white balance effect is one of the most important indicator display. Chromatology on red, green and blue color for the proportion of 1:4. Lost. 16 will only show the pure white, if the actual rate is a little deviation will appear white balance deviation, generally pay attention to whether there is a slant blue, white slant yellow phenomenon .The stand or fall of the white balance is mainly composed of display control system to determine, tube core of color reducibility may also be affected.
6 dead refers to the phenomenon of Mosaic, Mosaic, appear on the screen normally on or often black small four squares, both module necrosis phenomenon, the main reason for the display of connectors quality closes nevertheless.
Latest LED project
Contact Us
If you are interested in our products , Please call us or email to us. We will give you more demands and help!
Company: SHANGHAI HARSE ELECTROMECHANICAL TECHNIC CO.,LTD
Contacts:
Office: + 86-021-61993536
Mobile: + 86-13918891309(WeChat)
Company: SHANGHAI HARSE ELECTROMECHANICAL TECHNIC CO.,LTD
Contacts:
Office: + 86-021-61993536
Mobile: + 86-13918891309(WeChat)
Attention Us
Please pay attention to the micro-channel Public number of Harse enterprises Shanghai Harse Electromechanical Technc Co., Ltd specializes in manufacturing and installing led display. It's the guidance of experts
for you to choose the led display .
